Author Topic: field emission display screen seminar report  (Read 8151 times)

field emission display screen seminar report
« on: January 15, 2017, 12:00:00 AM »
[88]
ABSTRACT
With a 100-year head start over more modern screen technologies, the CRT is still a formidable technology. It „¢s based on universally understood principles and employs commonly available materials. The result is cheap-to-make monitors capable of excellent performance, producing stable images in true colour at high display resolutions. But in the world of miniaturization, Cathode ray tubes (CRT) are giant dinosaurs waiting for extinction. A CRT uses a single-point hot electron source that is scanned across the screen to produce an image.
The CRT „¢s most obvious shortcomings are well known:
 ¢   It uses too much electricity.
 ¢   Its single electron beam design is prone to misfocus, misconvergence and colour variations across the screen.
 ¢   Its clunky high-voltage electric circuits and strong magnetic fields create harmful electromagnetic radiation.
 ¢   It „¢s physically too large.
 Attempts to replace bulky Cathode ray tubes resulted in the introduction of the field emission display screens (FED) screens. It will be the biggest threat to CRT „¢s dominance in the panel display arena. Instead of using a single bulky tube, FEDs use tiny Ë mini tubes „¢ for each pixel, and the display can be built in the same as a CRT screen.
The FED screens are lightweight, low power consuming and compact. The FEDs can be used instead of some other technologies are gaining market share in big screen and PC monitors, such as Projection TV, Plasma Displays, Liquid Crystal, and Organic Transistor Displays.

INTRODUCTION
Various types of displays have become common in the every day life. The displays are used in televisions, computers etc. They also have wide use in laboratories and in medical applications. The displays are those devices by which we can view moving objects. The displays are manufactured depending upon their application.
One of the hottest markets driving physics research is the demand for a perfect visual display. People want, for example, large, thin, lightweight screens for high-definition TV and outside displays and very high resolution flat computer monitors that are robust and use little power. Several types of flat display are competing for these applications.  Not surprisingly, the research departments of universities and the big electronics companies around the world are bustling with exciting ideas and developments. New university spinout companies are developing many new devices. The different types displays available are:
 ¢   Liquid crystal displays
 ¢   Plasma displays
 ¢   Electro luminescent displays
 ¢   Field emission displays
 ¢   Projection displays
LIQUID CRYSTAL DISPLAYS
Even the liquid crystal display    (LCD), which has 85 per cent of the flat-screen market, is still a young technology and the subject of very active research. LCDs depend on arrays of cells (pixels) containing a thin layer of molecules which naturally line up (liquid crystals); their orientation can be altered by applying a voltage so as to control the amount of light passing through. Their main drawbacks have been poor viewing characteristics when seen from the side and in bright light, and a switching speed too slow for video. Electrically sensitive materials called ferroelectric and antiferroelectric liquid crystals show potential. These work slightly differently and are bistable so should use less power. They can respond 100 to 100 times faster than current displays, and should give brighter images from all angles. One solution to the drawbacks of LCDs is to combine them with another technology. Indeed, the latest, high quality LCDs on the market incorporates a tiny electronic switch (a thin film transistor, TFT) in each pixel to drive the display.
PLASMA DISPLAYS
Although LCDs up to a 42-inch diagonal have been demonstrated, for larger flat TV screens, companies have instead turned to plasma display panels. These employ gas discharges (as in a fluorescent tube) controlled by an electrical signal. The ionised gas, or plasma, emits ultraviolet light which stimulates red, green and blue phosphors inside each pixel making up the display panel to produce coloured light. The images on the latest displays are very clear and bright. Unfortunately they are still expensive.  
ELECTRO LUMINESCENT DISPLAYS
One of the most promising emerging display technologies exploits ultra thin films of organic compounds, either small molecules or polymers, which emit light (luminescence) when subjected to a voltage. These organic light-emitting diodes (OLEDs) produce bright, lightweight displays.
 
FIELD EMISSION DISPLAYS
The other major technology competing for the flat screen, market is the field emission display. This works a bit like a cathode-ray tube, except that electrons are emitted from thousands of metal Ë micro-tips „¢, or even a diamond film, when an electric field is applied between the tips and a nearby phosphor coated screen. Printable Field Emitters, based at the Rutherford Appleton Laboratory near Oxford, has come up with a novel idea employing low-cost composite materials deposited and patterned using screen printing and simple photolithography. This technology could produce affordable displays in the 20 to 40-inch diagonal range suitable for TVs.
PROJECTION DISPLAYS
Finally, a completely different approach showing potential is to direct light from an image source using wave-guides through a glass or plastic sheet onto a screen. A clever variation of this is Ë the Wedge „¢ developed by Cambridge 3D Display. Light rays pass up a thin wedge-shaped glass plate and emerge at right angles at various points depending on the angle of entry. The beauty of this device is that it could be used to projects any kind of micro-display  LCD or OLED, for example  onto a screen.
All of the technologies described here still have drawbacks and no one yet knows which will win the big prize of flat screen TVs. It is likely that all of them will find niche markets. The next five years will certainly see a revolution in flat screen development.
FED  TECHNOLOGY
The FED screen mainly contains three parts:
1.   Low-voltage phosphors.
2.   A field emission cathode using a thin carbon sheet as an edge emitter.
3.   FED packaging, including sealing and vacuum processing.
 
 
LOW VOLTAGE PHOSPHORS
The low voltage phosphors are the screens in which the images are displayed. In the display technology the phosphor screens act as anode, which receives the electrons emitted from the cathode. The phosphor glows when the electrons bombards with it to show the images. The phosphors are made up of layers of three primary colours -green, red and blue. These colour phosphors are displayed by the field sequential colour in which the green information is read first then redrawn with red information and finally with blue colour. The FED may have pixel pitches of about 0.2mm.
FIELD EMISSION CATHODE
In the field emission display screen the cathode are electron guns that emit electrons. Here there are about 200-million electron guns called micro tips. The emission of electrons is called cold cathode emission. Each of these micro tips is smaller than one micrometer and they are deposited into a dense grid. They are made up of materials such as molybdenum.
 
 The micro tips can be of different types:
1.   Wedge type emitter using silicon.
2.   Silicon tips with continuous coating of diamond particles.
3.   Single-crystal diamond particle on silicon tips.
4.   Planar diode emitter.
5.   Metal-insulator-semiconductor type planar emitter
Wedge type emitter using silicon
 
   The out standing features of wedge type emitter using silicon are its brightness and low vacuum requirements. It has a packaging density of 106 emitters per mm2 at the rate of 103 emitters per pixel. It has an accelerating electrode potential of 40V and low power consumption. However this display has to go miles in the case of price and mass production status.
Silicon tips with continuous coating of diamond particles
 
These cone-shaped blunt emitters have a radii of curvature ranging from 0.3 to 3 pm. The low work function can offer considerable current at low voltage field emission.
Single-crystal diamond particle on silicon tips.
Instead of plating the polycrystalline diamond particles on silicon tips, diamond particles can be placed on the tips of silicon needle to form a field emitter. The only drawback is the expenditure involved in placing diamond particles on the tips of silicon needle.
 
Planar diode emitter.
The planar diode emitter configuration uses a diamond like carbon emitter. They are easy to fabricate and much suited for mass production. One disadvantage for this type of displays is that once failed, the display will have to work with out that pixel.
 
Metal-insulator-semiconductor type planar emitter
 
A new type of field emission display (FED) based on an edge-enhance electron emission from metal-insulator-semiconductor (MIS) thin film structure is proposed. The electrons produced by an avalanche breakdown in the semiconductor near the edge of a top metal electrode are initially injected to the thin film of an insulator with a negative electron affinity (NEA), and then are injected into vacuum in proximity to the top electrode edge. The condition for the deep-depletition breakdown near the edge of the top metal electrode is analytically found in terms of ratio of the insulator thickness to the maximum (breakdown) width of the semiconductor depletition region: this ratio should be less than 2/(3 \pi - 2) = 0.27. The influence of a neighboring metal electrode and an electrode thickness on this condition are analyzed. Different practical schemes of the proposed display with a special reference to M/CaF_2/Si structure are considered.
FED PACKAGING
The field emission display screens are comprised of a thin sandwich. In this the back is a sheet of glass or silicon that contains millions of tiny field emitters which is the cathode. The front is a sheet of glass coated with phosphor dots, which is the anode. The anode and cathode are a fraction of millimeter apart.
 
The final packaging of the field emission display screen is as shown in the figure above. The front portion here is the Phosphor and the back represents the emitter or micro tips.
WORKING
The field emission display works a bit like the cathode ray tube except that electrons are emitted from thousands of metal micro tips or even from a diamond film. This emission of electron occurs from the cold cathode when a voltage is applied between the cathode and anode. These electrons propagate from cathode to anode. They bombard with the phosphor, which is the anode and causes it to glow. This reproduces the image on the screen by the mixing of colours present in the screen.
 
    There are two basic ways in which working of an FED can be explained:
1.   Low voltage anode
2.   High voltage anode
LOW VOLTAGE ANODE
The low voltage approach uses the field sequential colour method as I mentioned earlier. In this method the entire screen is individually painted in each of the three primary colours, one at a time. As each of the colours are painted separately only that colour phosphor is grounded, so that all the electrons can strike that particular colour. This prevents any of the electrons to strike accidentally the other colours present in the screen. This may be a problem in the case of the low voltage approach.
HIGH VOLTAGE ANODE
In the high voltage approach the emission from micro tip radiate in a roughly 600 cone. When these tips are very close to anode, the spread to emitted stream of electron is small enough to result in a spot of nearly 0.33mm diameter. When the anode voltage is increased further greater phosphor efficiency is required and also the distance between anode and cathode should be increased to prevent arcing. Also focusing will be required in this case.
 
The light emitting principle of the field emission display screen is as shown in the figure below.
 
 
FED CHARACTERISTICS
In the world of miniaturization, Cathode ray tube (CRT) is giant dinosaurs waiting for extinction. A CRT uses a single-point hot electron source that is scanned across the screen to produce an image. Comparing with the CRT displays the field emission displays has many advantages. They are:
1.   Brightness
2.   Speed
3.   Compact and lightweight
4.   Display size
5.   Low driving voltage
6.   Wider viewing angle
7.   High illumination
8.   Wide temperature extremes
9.   Colour Quality
 BRIGHTNESS
Most displays are adequate in normal (50  100 fc) room lighting. However, in dimly lit situations, such as a patient bedside at night, dim (reflective) displays are difficult to read. Most alarming, a dim display may be deceptively easy to misread.
Because an FED is an emissive display that produces its own light, it can be dimmed continuously from full brightness to less than 0.05 fL. In direct sunlight applications there will be a problem of low contrast This often requires the use of special contrast enhancement filters, such as 3M micro louver filters to generate contrast.
SPEED
 Display speed is the rate at which the image can be changed while maintaining image detail. Displays with inadequate response times will create
image "smear" that can be confused with defective blood flow, or will hide jitter that can indicate instability or electrical interference. With a response time of 20 nanoseconds, FED technology produces smear-free video images.
COMPACT AND LIGHTWEIGHT FLAT PANEL DISPLAYS
Far less bulky than the CRT or plasma emission based displays, and are also significantly brighter than back lit LCDs.
DISPLAY SIZE
This technology could produce affordable displays in the 20 to 40-inch diagonal range suitable for TVs.
LOW DRIVING VOLTAGE
As discussed earlier the field emission displays can be made to work in extremely low voltage conditions with some limitations.
WIDER VIEWING ANGLE
A main advantage of the field emission display screens when compared with the ordinary cathode ray tube display is its wider viewing angles. The FED s can attain a viewing angle of 1600.
 
HIGH ILLUMINATION
The FED glows by itself by the bombarding of the electrons on the phosphor screen. So the FEDs can attain high illumination.
WIDE TEMPERATURE EXTREMES
Unlike CRTs, FEDs have no cathode heater, no deflection system, and no shadow mask. Because of the cold cathode emission, instant-on is available at wide temperature extremes (  40 to 85Â °C).
COLOUR QUALITY
FEDs use conventional TV phosphors. This is of particular importance in such areas as telemedicine. The ability of a display to show true flesh tones depends in part on the colorimetry of the display. TV phosphors have been fine-tuned for decades to provide the most natural skin tones possible, and, although not yet widely used, are unchanged in some FEDs.
FED technology provides a wide gamut with continuous dimming and 8-bit gray scale. Its image is equally bright from any viewing angle, and power efficiency is high (from 3 to 40 lm/W, depending on voltage and phosphor).
FEDs produce gray scale by a number of different methods.
a.   Frame Rate Control
b.   Pulse Width Modulation (PWM)
c.   Voltage Modulation
d.   Current or Charge Control
e.   Mixed-Mode Modulation
Frame Rate Control
 Running at, for example 400 Hz, a 50% gray level can be obtained by alternating a white and a black field every other frame. A 25% gray level can be achieved by alternating one of four frames to white, or one out of 400 frames. This method is simple, allowing the use of digital on/off drivers, but the FED runs into flicker at low, and capacitive switching problems at high, frequency.
Pulse Width Modulation (PWM)
 PWM requires the column to switch off earlier than the row time to decrease the pixel brightness level. The advantage to this method is that when on, the tips are always operated at maximum voltage, but rate control delays can add up at short switching rates.
Voltage Modulation
This is the classic analog method of producing grey levels and gives a luminance response similar to that of a CRT. However, it requires accurate low-power drivers and very uniform tip response.
Current or Charge Control
 This method corrects for tip nonuniformity but requires complex drivers to control the emitted charge.
 
Mixed-Mode Modulation
This is the method most display integrators use. Some gray scale is obtained from partial use of two or more of the above modes, thus avoiding the extreme conditions of any one method.
FED technology offers an array of display characteristics, ranging from efficient high-voltage focused versions to cost-effective low-voltage proximity focused iterations. Extracting electrons from microtips and modulating them with a G-2 gate provides flexibility and allows display designers to specify visual performance. Because of the simpler assembly, custom performance and special sizes are less costly to produce
View angles   Brightness   Contrast   Speed   Colour
1600   To 3500 fL   <100:1   20 ns   TV colours
Table I. Field emission display characteristics
 
 DRAWBACKS
Even though the field emission display screens has many advantages as mentioned above it also have some disadvantages which may be listed below:
1.   Vacuum tubes do require maintenance.
2.   Current FEDs often suffer from variation in screen brightness across the display, and also within each pixel.
3.   Durability due to electrical discharge in the small gaps everywhere in FED prototypes.
4.   The killing problem was durability: the tips couldn „¢t survive under severe conditions of arcing (i.e. electrical discharge) due to the small gaps everywhere in FED prototypes.
5.   Another big problem for the FED concept is the cathode driver. For big screen applications, such as HDTV, it is difficult (if not impossible) to build a feasible high voltage (several hundred of switching voltage) driver for operating multiple (thousands) cathodes  power consumption will exceed several kilowatts for such a driver (note that modern TV set consumes only ~20-150 Watts of energy).
Since the FED uses the vacuum tubes like the cathode ray tubes it requires frequent maintenance. This drawback cannot be eliminated under any conditions.
The second, third and fourth drawbacks can be eliminated by using ballast resistors. The ballast resistors are those resistors that form a thin layer below the electron guns or micro tips. They are highly resistive in nature and it restricts the amount of current flowing through the micro tips.
 
FAQS
1.   What is field of view
Field of View (FOV) describes how the virtual image can appear to be to the viewer and is measured in degrees. >50 degree FOV per eye is possible using OLED micro displays.
2.   Why didn't the FED industry already take over
The short answer is that the fundamental FED idea was not supported by some advanced decision making technologies, such as the Ideality Approach  As a result of that, the FED industry has been depressed for many years.
3.   What is display speed
 Display speed is the rate at which the image can be changed while maintaining image detail.
4.   Why can it be used in Laptop computers
The FED promises full colour at low power consumption in a form factor that is compatible with laptop computers. Also it will be attractive.
 
5.   Is there any radiation for the field emission display screen
Since the field emission display screen uses the vacuum tubes and the phosphor screens there will be some radiation for it. The radiation effect of the FED screen will be similar to that of the cathode ray tube (CRT) display.
6.   Is there any interference among the electrons while it propagates
   
   At a time the cathode emits electrons that will hit the phosphor screen on only one colour. So even when the electrons interfere among themselves there will not be any loss of information.
7.   What is display size
Display is the total of the display in which the information can be obtained. For the field emission display screen the display is about 40-inches diagonally.
 
FED APPLICATIONS
1.   Sonographs
2.   X-ray imaging
3.   Heart-rate monitors
4.   Laptop computers
5.   Hang-on-the-wall televisions
6.   Big screen and PC monitors
7.   High-definition TV
 
CONCLUSION
CRT technology has already reached its technological and marketing limits and will likely be replaced in 10 years. The modern world needs substances that are small in size. This shows that the cathode ray tube do not have much to do anything in the market in future.  And it would die already, if Field Emission Display (FED) technology or any other displays would bring anything to the market.
 
BIBLIOGRAPHY
BOOKS
   ELECTRONICS FOR YOU, JUNE 2002
   ELECTRONICS FOR YOU, JULY 2002
WEB
   WW.SHARPWORLD.COM
   WW.WTEC.ORG
   WW.VIRTUALVISION.COM
   WW.EOFOUNDRY.COM
   WW.ISIS-INNOVATION.COM
   WW.ATIP.ORG
 
ACKNOWLEDGEMENT
   I extend my sincere thanks to Prof. P.V.Abdul Hameed, Head of the Department for providing me with the guidance and facilities for the Seminar.
   I express my sincere gratitude to Seminar coordinator
Mr. Manoj K, Staff in charge, for his cooperation and guidance for preparing and presenting this seminar.
   I also extend my sincere thanks to all other faculty members of Electronics and Communication Department and my friends for their support and encouragement.
                        Radheesh M
 
CONTENTS
   INTRODUCTION               01
   FED TECHNOLOGY               04
   WORKING                  11
   CHARACTERISTICS            14
   DRAWBACKS                  19
   FAQS                     21
   APPLICATIONS               23
   CONCLUSION                  24
   BIBLIOGRAPHY               25

Seminar Topics & Projects ppt pdf report downloads

field emission display screen seminar report
« on: January 15, 2017, 12:00:00 AM »

RE: field emission display screen seminar report
« Reply #1 on: January 15, 2017, 12:00:00 AM »
[2379]

Field Emission Display Screen

Introduction

   Displays are devices by which we can view moving objects
   Used in television and computers
   They also have wide use in laboratories and in medical applications.

History of displays

   Cathode ray tube
   Liquid crystal display
   Plasma displays
   Electro luminescent displays
   Field emission displays

FED Technology

   The FED screen mainly contains three parts:
   1.Low-voltage phosphorous plate
   2.A field emission cathode using a thin carbon sheet as an edge emitter
   3.FED packaging, including sealing and vacuum processing

Low voltage phosphor

   The low voltage phosphors are the screens in which the images are displayed
   In the display technology the phosphor screens act as anode, which receives the electrons emitted from the cathode
   The phosphors are made up of layers of three primary colours -green, red and blue

 
Field Emission Cathode

   In the field emission display screen the cathode are electron guns which emit electrons
   Electron guns are called micro tips
   The emission of electrons is called cold cathode emission

Micro tips are of different types

   Wedge type emitter using silicon.
   Silicon tips with continuous coating of diamond particles.
   Single-crystal diamond particle on silicon tips.
   Planar diode emitter.
   Metal-insulator-semiconductor type planar emitter

Working
 

   The field emission display works a bit like the cathode ray tube
   This emission of electron occurs from the cold cathode when a voltage is applied between the cathode and anode
   . These electrons propagate from cathode to anode
    They bombard with the phosphor, which is the anode and causes it to glow
   This reproduces the image on the screen by the mixing of colours present in the screen

Two ways of working
 
   Low voltage anode
   High voltage anode

Low Voltage  Anode
 

   In this method the entire screen is individually painted in each of the three primary colours, one at a time.
   As each of the colours are painted separately only that colour phosphor is grounded, so that all the electrons can strike that particular colour
    This prevents any of the electrons to strike accidentally the other colours present in the screen.

   High Voltage Anode In the high voltage approach the emission from micro tip radiate in a roughly 600 cone
   When these tips are very close to anode, the spread to emitted stream of electron is small enough to result in a spot of nearly 0.33mm diameter
    When the anode voltage is increased further greater phosphor efficiency is required and also the distance between anode and cathode should be increased to prevent arcing

FED Characteristics

   Brightness
   Speed
   Compact and lightweight
   Display
   Low driving voltage
   Wider viewing angle
   High illumination
   Wide temperature extremes
   Colour Quality

Draw Backs

   Vacuum tubes do require maintenance.
   Current FEDs often suffer from variation in screen brightness across the display, and also within each pixel.
   Durability due to electrical discharge in the small gaps everywhere in FED prototypes.
   The killing problem was durability: the tips couldn „¢t survive under severe conditions of arcing (i.e. electrical discharge) due to the small gaps everywhere in FED prototypes.
   Another big problem for the FED concept is the cathode driver. For big screen applications, such as HDTV, it is difficult (if not impossible) to build a feasible high voltage

FED Applications

   Sonograms
   X-ray imaging
   Heart-rate monitors
   Laptop computers
   Hang-on-the-wall televisions
   Big screen and PC monitors
   High-definition TV

Conclusion

   CRT technology has already reached its technological and marketing limits and will likely be replaced in 10 years.
   The modern world needs substances that are small in size.
   This shows that the cathode ray tube do not have much to do anything in the market in future.  And it would die already, if Field Emission Display (FED) technology or any other displays would bring anything to the market.

Seminar Topics & Projects ppt pdf report downloads

RE: field emission display screen seminar report
« Reply #1 on: January 15, 2017, 12:00:00 AM »

academic expert

  • Posts: 5361
    • View Profile
RE: field emission display screen seminar report
« Reply #2 on: January 15, 2017, 12:00:00 AM »
Prepared By:  
   Ryan Michaud
   Adam Neale
   Andrei Iakimtchik


[10855]
Field Emission Displays
   The future of display technology?
History of Display Technology
Cathode Ray Tube
1950’s
   Cathode Ray Tubes (CRT)
   Liquid Crystal Display
   Plasma Display Panel
Technology Comparison
   Advantages
   Good representation
   Large viewing angle
   Fast response time (50 µs)
   Low price
   Multiple resolutions
   Shortcomings
   Large and bulky (2 kg/in)
   Flicker causes eye strain
   High power (11 W/in)
Advantages
Shortcomings

   Light weight (0.6 kg/in)
   Low power (5 W/in)
   Less eye strain
   High brightness (500 Cd/m2)
   Small viewing angle
   Slow response time (8 ms)
   Weaker contrast & color
Advantages
Shortcomings

   High brightness (100 Cd/m2)
   High contrast (100:1)
   Large viewing angle
   More power vs LCD (8 W/in)
   Burn-in effect
   Size limitation (>40”)
   Slow response time
   FED: The Best of Both Worlds
Promised Advantages
   Very light (100 g/in)
   Large Viewing angle (178o)
   Extremely fast (20 ns)
   Low power (0.2 W/in)
   High contrast (10x PDP)
   No flicker
   No dead pixels
How FED Works?
   Array of mini-CRTs
   Technology Options - SED
   Technlogy Options - Spindt
   Technology Options - CNT
   Companies Researching FED
   Canon and Toshiba joint venture in SED
   Sony promises Spindt-type FED display in 2009
   Samsung is researching CNTs, Applied Nanotech Inc. have made a 25” display
Challenges: Technical Problems
   Fluctuations in emission current
   Low cost manufacturing methods
   Developing for areas
   Tip damage
   High vacuum levels required
Dropping LCD prices
   LCD panels are dropping in cost while increasing in quality
Hope for FED Displays
   The success of FEDs depends on:
   Cost
   Quality
   Timing

nasheer

  • Posts: 3
    • View Profile
RE: field emission display screen seminar report
« Reply #3 on: January 15, 2017, 12:00:00 AM »
thanks
..

project expert

  • Posts: 6597
    • View Profile
RE: field emission display screen seminar report
« Reply #4 on: January 15, 2017, 12:00:00 AM »


to get information about the topic"field emission display screen seminars report" please refer the link bellow
http://projects-seminars.net/Thread-field-emission-display-screen-seminar-report?pid=57230#pid57230

Guest

  • Guest
RE: field emission display screen seminar report
« Reply #5 on: January 15, 2017, 12:00:00 AM »
Respected sir,
  I would like to take a seminars on topic field emission display screen,so kindly send me more datas on this topic to my email Id:[email protected]

Guest

  • Guest
RE: field emission display screen seminar report
« Reply #6 on: January 15, 2017, 12:00:00 AM »
send me more info. about fed plzz i wanna give a seminar on it

Tags:
 
Data Mining: What is Data Mining? Report

Started by engineering project helperBoard Computer Science Seminar Topics

Replies: 0
Views: 563
Last post January 15, 2017, 12:00:00 AM
by engineering project helper
Demand and Supply And Law of Demand and Supply Report

Started by engineering project helperBoard MBA Business Seminar Topics

Replies: 0
Views: 754
Last post January 15, 2017, 12:00:00 AM
by engineering project helper
ppt of igct,report of igct

Started by Jinu ShajuBoard Seminar Requests

Replies: 2
Views: 1651
Last post January 15, 2017, 12:00:00 AM
by Guest
Vehicle-to-Vehicle (V2V) report

Started by project source code chekerBoard Electronics Seminar Topics

Replies: 0
Views: 502
Last post January 15, 2017, 12:00:00 AM
by project source code cheker
DRIP IRRIGATION AND CLOGGING IN DRIP IRRIGATION full report

Started by best project report makerBoard Civil Engineering Seminar Topics

Replies: 1
Views: 4569
Last post January 15, 2017, 12:00:00 AM
by project helper
Power factor and circuits to improve power factor Report

Started by engineering project helperBoard Electrical Seminar Topics

Replies: 0
Views: 572
Last post January 15, 2017, 12:00:00 AM
by engineering project helper
solar fertilizer sprayer or solar seed sprayer report

Started by GuestBoard Projects and Seminars Request

Replies: 0
Views: 640
Last post January 15, 2017, 12:00:00 AM
by Guest
EVOLUTION OF PEER TO PEER DOWNLOADING PEER TO PEER NETWORK full report

Started by seminar topics makerBoard Computer Science Seminar Topics

Replies: 0
Views: 1863
Last post January 15, 2017, 12:00:00 AM
by seminar topics maker
Dynamic Routing with Security Considerations full report Dynamic Routing with Securi

Started by ramurameshBoard General Technical Request

Replies: 1
Views: 817
Last post January 15, 2017, 12:00:00 AM
by project expert
ROBOTIC HAND ACTION WITH RESPECT TO HUMAN HAND ACTION full report

Started by project ideasBoard Electronics / Electrical/Instrumentation/Applied Electronics Project Ideas

Replies: 0
Views: 534
Last post January 15, 2017, 12:00:00 AM
by project ideas